VernierscaleHow a vernier scale works

Författare/Upphovsman:

Lookang many thanks to Fu-Kwun Hwang and author of Easy Java Simulation = Francisco Esquembre

Tillskrivning:

Bilden är taggad "Attribution Required" men ingen tillskrivningsinformation lämnades. Attributionsparametern utelämnades troligen när MediaWiki-mallen användes för CC-BY-licenserna. Författare och upphovsmän hittar ett exempel för korrekt användning av mallarna här.

Kreditera:

Eget arbete

Kort länk:

https://sewiki.info/b/ac0f9

Källa:

Wikimedia Commons

Upplösning:

300 x 300 Pixel (24639 Bytes)

Beskrivning:

The vernier scale is constructed so that it is spaced at a constant fraction of the fixed main scale. So for a decimal measuring device each mark on the vernier would be spaced nine tenths of those on the main scale. If you put the two scales together with zero points aligned then the first mark on the vernier scale will be one tenth short of the first main scale mark, the second two tenths short and so on up to the ninth mark which would be misaligned by nine tenths. Only when a full ten marks have been counted would there be an alignment because the tenth mark would be ten tenths, that is a whole main scale unit, short and will therefore align with the ninth mark on the main scale. Now if you move the vernier by a small amount, say, one tenth of its fixed main scale, the only pair of marks which come into alignment will be the first pair since these were the only ones originally misaligned by one tenth. If we had moved it 2 tenths then the second pair and only the second would be in alignment since these are the only ones which were originally misaligned by that amount. If we had moved it 5 tenths then the fifth pair and only the fifth would be in alignment. And so on for any movement, only one pair of marks will be in alignment and that pair will show what is the value of the small displacement.

Licens:

CC BY-SA 3.0

Licensvillkor:

Creative Commons Attribution-Share Alike 3.0